Re: RST 13.2.4.1000 frequently access DVDROM and event viewer reported CDROM...
Hi Gize, I have the same observation as you. I didn't have this problem with RST 13.1, it is only RST 13.2 that give me problem. Anyway I reverted back to the last version of RST12 and it doesn't give...
View ArticleHow to connect Edison to Wifi, troubleshooting Wifi.
Hi, new Edison programmer here!I am able to run the commands on the website (screening into the device, connecting to a wifi network, and I am given an IP address. However, putting the IP address in my...
View ArticleRe: d34010wyk will not post
I am having the same issue, so I figured that I would reply to this discussion rather than start a new one. I just got a new NUC D34010WYK, and was able to load Windows 7 with no problems. I installed...
View ArticleClik here to view.
Re: How best proceed with overheating i7-4790K?
I also have the same problem with overheating i7-4790K.When idle the temps are between 25-30 with cooler stock 1150 rpm +/-I looked at the batch and it is indeed L4.(L425B824)I use ASUS Z97-A...
View ArticleRe: Intel® Wireless-N 7260 - slows
Now we have: 17.1.1433.0217.1.1409.0486 17.13.0.9 WHQLall at neacom.netgoing to try a couple of these and see what happens. using Win7 x64.
View ArticleClik here to view.
Re: 7260AC keeps dropping out, crashing laptop, forcing reboot?!
davidenco wrote: Just found this: http://community.virginmedia.com/t5/Wireless-Networking/Superhub2-and-intel-dual-band-ac-7260/m-p/2441043/highlight/false#M60979 Seems the 40Mbit cap is now resolved;...
View ArticleRe: 7260AC keeps dropping out, crashing laptop, forcing reboot?!
I have a similair issue with mine. I can get to use it sometimes at one point it went for an hour but then after it glitched and lost network connection it went 5 minutes the next time. Basically I...
View ArticleRe: Intel Edison and mini break out board issues
I am an Intel Edison mini-breakout board user, not an Arduino user. Some of the quick things I have seen.Some users have switched cables to a more generic microB USB cable and the problem seemed fixed...
View ArticleRe: Powering on an S5520HC motherboard
Foot note. Pins 11-13 need a momentary connection/,Solid jumper will cause the board to stay off.
View Articleblink(1) working partially on an Edison
Over this weekend, I was able to get the blink(1) hardware to work on the Edison. blink(1) is a multi color USB led. [blink(1) | the USB RGB LED notification light]blink(1) tools and software :...
View Articlehow add inetutils to edison image
i want edison add telnetd funcion, so try add inetutils to edison image1. append open-embedded to device-softwarecd edison-src/device-softwaregit clone...
View Article3rd Generation Intel core processors with Intel HD Graphics 4000
Hello; Dxdiag and device manager says Intel HD Graphics 4000 is running driver version 10.18.10 after I installed version 15.33.30. I uninstalled the 10.18.10 driver, restarted, and installed...
View ArticleClik here to view.
Danger Shield not working w Edison/Arduino
The 2nd edition of the Galileo shield report tests various popular Arduino shields running with the Edison (very handy, btw). One of the items it lists is the Sparkfun Danger shield (item #24). I...
View Articleboot from onboard SPI flash linux and automatically run sketch
When I rebooted the Galileo Gen 1 Board, the modified linux data will disappear, lilke "sketch.elf".Is it prossbile to automatically run sketch at every boot from onboard SPI flash linux? Thank you.
View ArticleRe: Will intel(R) dual band wireless-AC 7260 support full version of My wifi...
I downloaded all the software & driver from Intel® Download Center Wireless_17.1.0_s64.exe & Wireless_17.1.0_Ds64.exeHow to configure for wifi hotspot ?
View ArticleNUC D54250WYKH won't boot or show BIOS
I recently got a NUC D54250WYKH with associated memory / HDD as suggested by Amazon. I got it and after at little troubleshooting got Ubuntu Trusty installed and working. If left alone for a while, it...
View ArticleRe: NUC D54250WYKH won't boot or show BIOS
Same setup for my problem. It won't boot at all with two memory modules installed, but boots up and has been running solidly for several days now with only one module installed (in the upper slot.)...
View ArticleHelp Connecting to Wifi with Edison
Hello Everyone, I am new to Edison and have followed the steps for setting up the edison board for both windows and Mac on two different computers and I always get stuck when using terminal to do...
View Article