Re: 530 Raid 0 - 180gb
We have confirmed that you should not need to break the RAID to do a firmware update unless the drives are attached to an add-in RAID controller. You can update the firmware while they are attached to...
View ArticleRe: Intel Galileo 1 unidentified component half-broken
Thank you very much, I've got the same answer from another person.I close the discussion.
View ArticleClik here to view.
Re: Slow write on Probook 4540s with 530
It is SATA plug in intro "main" SATA connector.
View ArticleRe: DH87RL - fan issue
Scott, it's me again - after "some" time I'fe found the spare time to test the fan control with the information given by you. To make it shot: No change at allCPU fan still responses to the CPU temp as...
View ArticleIntel i5-2500k problems - Any help greatly appreciated
I have had my processor, Intel i5-2500k, for approximately 3 years now and have recently run into complications. About 2 months ago I moved locations and so took my built desktop with me. Ever since...
View ArticleRe: Intel Edison Camera Module
Hi, my constraint is 160x120 and ideally I would like to stream 320x240 video in (6-15FPS) I've realized the mini breakout board on the Edison is 1.8V pins and the SPI cameras that I looked at are all...
View ArticleOV7670 Camera module
Hi, just curious if anyone has tried to use OV7670 +FIFO with Intel Edison by connecting to GPIO pins. Regards,Danny
View ArticleRe: Edison and Arduino IDE connectivity issue
if you can't upload: have you checked that your rootfs isn't full? (see other threads on that) I have and they are. But I'm unsure how to change the config file so they don't fill up. For now, I just...
View ArticleRe: Edison w/ Arduino Expansion board no longer boot with 12V supply
Hi Brew once again thanks for the reply to my question....Guess what I pulled out a 6 pack 1.5v aa battery holder which comes out to 9.7v or something likethat and it worked I applied what you said...
View ArticleRe: Intel NUC DN2820FYK IR not working
Any progress with this yet Allan? I have just bought an NUC DN2820FYK and I am getting the exact same problem - infrared light not responding and no activity reported with 'irw'. Perhaps there's a...
View ArticleRe: Edison w/ Arduino Expansion board no longer boot with 12V supply
Honestly I do not know what exactly is going on with the boards. Maybe J1 would work with a lower voltage DC power supply? Maybe the VIN header is connected into a different pin of the SWITCHER and so...
View ArticleClik here to view.
Re: NUC DN2820FYKH and WiDi
My DN2820FYKH constantly refuses to run WIDi 3.1.29 and 3.0.13, and even to install 4.2.29 at all, reporting the system that is not compatible with WiDi. However, when I use Windows 8.1 charms bar...
View ArticleInstall fail - Intel MEI v9.5.14.1724_1.5M x86x64
Dear Members, Other latest drivers installed without error on both (INF, graphics, LAN, audio, SATA, USB3)With Win7 SP1 + updates x86 - no problem with MEIWith Win7 SP1 - no updates x64 - see below the...
View ArticleRe: Galileo Debian v1.2 image
As I was having issues with Yocto not seeing my devices on the USB on my Galileo G2, I thought I would try out the Debian build. Thanks!Took two attempts, the first one downloaded the 1.0... build,...
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
Yes, it's the same kernel. It's built using bitbake in the Yocto environment, and then copied to the Debian image or system.So if it's a kernel driver that's missing, you'll need to build the kernel...
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
u-boot on Edison expects vmlinuz (not vmlinux) to be present in the vfat boot partition (partition 7). NOT bzImage in the /boot folder in the ext4 partition, which is entiretly redundant. Why that's...
View ArticleBricked Board
How do I determine if my board is bricked? Here is my situation. I am trying to telnet into it so I can start working with Motion, and I was unable to connect over Ethernet. I then decided to just run...
View ArticleRe: HP 2740p cannot Install Widi software, meet all requirements...
Hello Jay,I had the same problem before, although my laptop-hardware meets all conditions I had this problem.My issue was a second graphic card (HD 4000 integrated plus NVIDIA GTX 675 m). I shut down...
View Article