Re: Intel SSD 530 hangs for 30 seconds every few minutes.
Update-- I attempted every fix I could find on any of the forums to include the low power registry edit, all driver updates, etc. In the end I reinstalled windows 7 again and switched to IDE instead...
View ArticleRe: Python, Wiring_x86, I2C LCD, Grove RGB LCD
First, the above script to set up I2C has only been tested on the Galileo Gen 1. The Gen 2 uses a different setup for I2c so will need its own setup.Running Python Scripts automaticallyNow that the...
View ArticleRe: Edison on development Arduino board will not respond from putty
You use the outer port to communicate via Putty, and use the COM port that is not the one you use with Arduino programming. Note that you do have to use external power when communicating with Putty,...
View ArticleRe: HD4000 incompatible with NVIDIA GTX 770M
I am having the same issue when i updated my msi gt60-one with a new nvidia gtx 970m. for the first week it works like a charm.. then I re-format and made a fresh install of windows 7 .. All drivers...
View ArticleClik here to view.
USB 3.0 eXtensible Host Controller Driver for 7 Series won't install
When trying to install USB 3.0 Driver: Intel® USB 3.0 eXtensible Host Controller Driver for Intel® 7 Series/C216 Chipset Family, I get error that my system does not meet minimum requirements. This is...
View ArticleRe: How best proceed with overheating i7-4790K?
I'm confused by 'kens' setting comments and how to set the (I presume 110a) is amps. My motherboard seems to only have voltage settings. Also intel (via email) keeps telling me to set the involt (not...
View ArticleBleno nodejs module and Intel XDK IoT Edition v.0087
Hi, I got “Error installing NPM module. Unsupported” when I use in the XDK IDE the “install/build button” to upload my project that has bleno module into the dependencies section of package.json...
View ArticleRe: i2c-tool pgk to be able to use SMBUS in python
Hi - problem solvedI had the same problem as Keiner, and am using AlexT's version of YoctoI found a newer version at: http://www.lm-sensors.org/wiki/I2CToolsremoved old: make uninstallChanged line in...
View ArticleRe: Arduino board
Yes, the port is correct and no, I did not tried to have 2 programs accesing the same port ... I don't know why!
View ArticleRe: What is the best i5 processor (apu) for gaming. What processor (apu) can...
Using the Intel Processor Feature filter in your other thread How do i tell if i can upgrade my laptop processor to a Intel Core i5 4690K 3.5GHz Socket 1150 6MB (toshiba satellite c660-2lk with intel...
View ArticleS1200BTS CPU fan installation
Hi, I am trying to install a Big Shuriken 2B on my S1200BTS, but it requires the use of a supplied backplate. I can't seem to remove the backplate that is mounted on the board, so I can't use my new...
View ArticleRe: Why cant i downgrade bios to other that bios 0030 on D54250wykh
Thanks for the information. This issue about Performance Tab at BIOS level has been reported to our engineering team, and they are currently working to get this issue resolved. Allan.
View ArticleRe: Unable to access detailed settings in BIOS (Performance tab)
I still do not have an estimate time of resolution but you can keep checking the post below for updates. D54250WYKH with 0028 BIOS, access to "Processor cores" settings Allan.
View ArticleClik here to view.
First day ok with 13V. Second day short circuit
Good Morning . I think I did damage. I powered the board means connector (J1) with 13V DC On the first day worked. Uploaded a blink skecth. The second day I do the same thing. But the power supply...
View ArticleRe: Intel Edison an Expensive Arduino Nano
Okay, I'll take the trolls bait... What are you trying to do with the board? Have you at least upgraded the firmware to the latest version? Have you tried installing the debian distribution on it?...
View ArticleRe: Intel Edison simply refuses any USB except serial Putty.
Sorry if I am missing something here. I have not done much yet with the USB side other than I have confirmed that I could connect a couple of devices to mine. In my case I connected up a USB2AX...
View ArticleRe: Is there a way to toggle GPIO direction without signaling all pins?
Hello llatta, Could you please attach your code? Regards, Peter.
View ArticleRe: Webcam throwing distorted Images
Which other board? OPENCV might have been configured differently on the other board.
View ArticleRe: Webcam throwing distorted Images
You could try accessing camera data with v4l directly to be closer to hw. If it works there it's not the driver.
View Article